Convert MOV to OGA — Free Online Tool
Convert MOV video files to OGA audio by extracting and encoding the audio stream as Vorbis inside an Ogg container. This is ideal for pulling high-quality audio from QuickTime recordings or professional video projects into an open, streamable audio format compatible with web players and Linux-based workflows.
to
FFmpeg Command
Copy this command to run the same conversion locally with FFmpeg on your desktop. Download FFmpeg
Drop your MOV file here
or click to browse
Free — no uploads, no signups. Your files never leave your browser.
Settings
Note: Browser-based encoding uses approximate quality targets. For precise CRF compression, copy the FFmpeg command above and run it on your desktop.
Estimated output:
Conversion Complete!
DownloadHow It Works
During this conversion, FFmpeg discards all video streams from the MOV container and re-encodes the audio — whether it was originally stored as AAC, PCM, or another codec inside the MOV — into Vorbis (libvorbis), then wraps it in an Ogg container with an .oga extension. Because MOV's default audio codec is AAC and OGA's default is Vorbis, a full audio transcode is always required; there is no lossless stream-copy path between these two codecs. The video data is silently dropped, and only audio tracks are processed. If your MOV contains multiple audio tracks, only the first (default) track is extracted into the OGA output, as the OGA/Ogg format does not support multiple audio tracks in the same way MOV does.
What Each Flag Does
| Flag | What it does |
|---|---|
ffmpeg
|
Invokes the FFmpeg binary, the open-source multimedia processing engine that powers this conversion both in the browser (via FFmpeg.wasm) and on the command line. |
-i input.mov
|
Specifies the input file — a MOV (QuickTime) container that may contain video, audio, subtitles, and chapter data, all of which FFmpeg will parse before extracting only the audio stream for the OGA output. |
-c:a libvorbis
|
Sets the audio codec to libvorbis, which re-encodes the MOV's audio (typically AAC) into the Vorbis format required by the OGA container. A full transcode is necessary because AAC cannot be stored natively inside an Ogg-based container. |
-q:a 4
|
Sets the Vorbis encoder's variable bitrate quality level to 4 on a 0–10 scale, targeting approximately 128 kbps average bitrate. This is the default balance between file size and audio fidelity suitable for most speech and music extracted from MOV files. |
output.oga
|
Defines the output filename with the .oga extension, which signals to FFmpeg — and to downstream media players and web servers — that this Ogg container holds audio-only content encoded in Vorbis. |
Common Use Cases
- Extracting a voiceover or narration recorded inside a QuickTime MOV from a screen capture session to publish as a podcast or audio lesson in an open format
- Converting interview footage shot on a Mac or iPhone (saved as MOV) into OGA for use on a web page with an HTML5 audio player that prefers open Ogg-based formats
- Stripping the audio from a professionally edited MOV project file to create a standalone music or sound design asset for distribution on open-source or Linux-first platforms
- Archiving the audio commentary track from a QuickTime video in OGA/Vorbis format, which offers better compression-to-quality ratios than MP3 at the same bitrate
- Preparing audio content from MOV recordings for use in a Firefox-based or Chromium-based web app where Vorbis in an Ogg container has strong native support without additional plugins
- Converting a MOV audio memo or field recording captured on Apple hardware into OGA for indexing and playback in open-source media library software like Rhythmbox or Clementine
Frequently Asked Questions
Yes, there is a generation of quality loss because this conversion transcodes from one lossy codec (AAC, which is the default audio codec in MOV) to another lossy codec (Vorbis). Both codecs are high-quality at reasonable bitrates, but any lossy-to-lossy transcode introduces some cumulative degradation. If your MOV source contains lossless audio such as PCM or FLAC, the quality loss from encoding to Vorbis at the default quality setting (q:a 4) will be minimal and largely imperceptible.
No. OGA, as an Ogg-based audio container, does not support multiple independent audio tracks the way MOV does. This FFmpeg command will extract only the first (default) audio track from your MOV file. If you need a specific non-default audio track — for example, a dubbed language track — you would need to modify the command to select it explicitly using the '-map' flag before running the conversion.
OGG is a general-purpose Ogg container file extension commonly associated with Vorbis audio, while OGA is the formally designated extension specifically for audio-only Ogg streams as defined by the IANA media type 'audio/ogg'. Functionally they are nearly identical containers, but using .oga makes it explicit that the file contains only audio — no video or subtitles — which helps media players and web servers identify and stream the content correctly.
The quality is controlled by the '-q:a 4' flag, which uses Vorbis's variable bitrate quality scale from 0 (lowest quality, smallest file) to 10 (highest quality, largest file). The default of 4 produces roughly 128 kbps on average and is a good general-purpose setting. For higher-fidelity output from a professional MOV source, try '-q:a 6' or '-q:a 8'; for a smaller file where quality is less critical, '-q:a 2' or '-q:a 3' is a reasonable choice.
Yes. On Linux or macOS you can use a shell loop: 'for f in *.mov; do ffmpeg -i "$f" -c:a libvorbis -q:a 4 "${f%.mov}.oga"; done'. On Windows PowerShell you can use 'Get-ChildItem *.mov | ForEach-Object { ffmpeg -i $_.FullName -c:a libvorbis -q:a 4 ($_.BaseName + ".oga") }'. This processes each MOV in the current directory and outputs a matching OGA file, which is especially useful when extracting audio from a large batch of QuickTime recordings.
OGA does support chapter markers through the Ogg metadata mechanism, and FFmpeg will attempt to carry over chapter data from the MOV container. However, practical support varies: not all MOV files embed chapters in a way FFmpeg can cleanly map to Ogg chapters, and many OGA-compatible players do not display chapter navigation even when the data is present. If chapters are critical to your workflow, verify the output with a player like VLC after conversion.
Technical Notes
MOV is a feature-rich container developed by Apple that can carry a wide variety of video and audio codecs, metadata, chapter markers, multiple audio tracks, and even transparency data. OGA is a comparatively minimal audio-only container built on the Ogg format, designed for open-standard audio codecs: Vorbis, FLAC, and Opus. When converting MOV to OGA, all video, subtitle, and extra audio track data is dropped entirely — only the first audio stream survives. Because MOV files from Apple devices and Final Cut Pro typically contain AAC audio, and OGA's default codec is Vorbis, a full audio transcode is unavoidable. Vorbis uses a quality-based variable bitrate system (q:a 0–10) rather than a fixed bitrate, making it difficult to predict exact output file sizes, though at q:a 4 you can expect output roughly comparable in size to a 128 kbps MP3. Metadata tags such as title, artist, and album are generally carried over from the MOV's QuickTime metadata into Ogg's comment header fields, though field name mappings are not always one-to-one. One known limitation: if your MOV contains multi-channel audio (5.1 surround), Vorbis handles it natively, but downstream player support for multi-channel Vorbis in OGA is inconsistent compared to stereo.